How To Stop A Windows Service From Command Line

GUI is very popular due to its simplicity and ease of access. But when it comes to managing or automating Windows services, CLI is simply superior and more efficient if you are used to using it.

To stop a Windows service through Command-Line, you can use the Stop-Service cmdlet in PowerShell or the Net stop command in CMD.

We’ve provided step-by-step guidelines on how to do so below.

How to Stop a Windows Service From Command Line

In addition to the commands mentioned above, you can also use the Set-Service cmdlet in Powershell or theSc stop command in CMD to stop a Windows Service.

Using PowerShell

Before going to the actual process, here’s what the commands do.

1. Press Windows + X and then press A to open Windows PowerShell (Admin).
2. Type and enter Get-Service to get a list of all services.
   
3. Type either of the following commands:
   • Stop-Service -Name “service-name-here”
   • Set-Service -Name “service-name-here” -Status stopped
     Replace “service-name-here” with the Name or DisplayName from Step 2 and press Enter.
     For e.g. Stop-Service -Name AJRouter
4. Type get-service “service-name-here“ to check if the service is stopped.
   

Using Command Prompt

Sc queryex obtains and displays detailed information about all active services by default. With the use of certain parameters, it can also show info on drivers, their state, and more.

Both Net stop and sc stop can stop a service. But Net only works locally while sc can be used over a network.

1. Press Windows + R to launch Run.
2. Type cmd and press CTRL + Shift + Enter to launch Elevated Command Prompt.
3. Type sc queryex state= all type= service and press Enter to get a list of all the services.
   
4. Note the SERVICE_NAME and DISPLAY_NAME of the service you want to stop. You can replace “service-name-here” with either of these values in Step 5.
   For Step 6, replace it with SERVICE_NAME specifically, as DISPLAY_NAME won’t work with the sc stop command.
5. Type and enter net stop “service-name-here”.
6. Alternatively, type sc stop “service-name-here” and press Enter.
   For e.g. sc stop spooler
   

Start/Restart Windows Service from Command Line

In Powershell, you can use the start-service or restart-service cmdlets as appropriate. As CMD doesn’t have a command to restart a service directly, we’ll combine the net stop and net start commands instead.

Powershell

1. Press Windows + X and press A to launch Windows PowerShell (Admin).
2. Type Get-Service and press Enter to get a list of all services.
3. Note the Name and DisplayName of the service you want to start. Replace “service-name-here” with either of these values in the next step. Also, note the status.
4. If the status is stopped, type the following command and press Enter:
   Start-Service -Name “service-name-here”
5. If the status is running, type the following command and press Enter:
   Restart-Service -Name “service-name-here”
6. Check the status of the service with the following command:
   get-service “service-name-here”
   

Command Prompt

In CMD, you’ll have to stop the service first and restart it afterward. Otherwise, you’ll get a The requested Service has already been started error.

1. Press Windows + R to launch Run.
2. Type cmd and press CTRL + Shift + Enter to launch Elevated Command Prompt.
3. Type sc queryex state= all type= service and press Enter to get a list of all the services.
4. Note the SERVICE_NAME and DISPLAY_NAME of the service you want to stop. You can replace “service-name-here” with either of these values in Step 5.
   For Step 6, replace it with SERVICE_NAME specifically as DISPLAY_NAME won’t work with the sc start command.
5. Type net stop “service-name-here” && net start “service-name-here” and press Enter.
   
6. Check the status of the service with the following command:
   sc queryex “service-name-here”

Change Windows Service Startup Type from Command Line

You can use the Set-Service cmdlet to change the startup type in Powershell. In Command Prompt, you can instead use the sc config command.

Powershell

The acceptable values for the StartupType parameter are as follows:

1. Press Windows + X to open the quick link menu.
2. Press A and accept the prompt to launch Windows PowerShell (Admin).
3. Type Get-Service and press Enter to get a list of all services. 
4. Note the Name and DisplayName of the service you want to start. Replace “service-name-here” with either of these values in the next step.
5. Type the following command, replace Automatic with the appropriate startup type, and press Enter:
   Set-Service -Name “service-name-here” -StartupType Automatic
   

Command Prompt

The acceptable values for the start parameter are as follows:

1. Press Windows + R to launch Run.
2. Type cmd and press CTRL + Shift + Enter to launch Elevated Command Prompt.
3. Type sc queryex state= all type= service and press Enter to get a list of all the services.
4. Note the SERVICE_NAME and DISPLAY_NAME of the service you want to stop. Replace “service-name-here” with either of these values in the next step.
5. Type the following command, replace auto with the appropriate start option, and press Enter:
   sc config “service-name-here” start=auto
   

How to Fix Can’t Stop Windows Service Because Of Access Denied System Error?

If you launch CMD/PowerShell without admin privileges and try to stop a Windows Service, you will encounter this error. To fix this, launch them in elevated mode, and you’ll be able to stop the service.